IO-Power IOP-SCBP-D12O48-1 Outdoor12VDC Series Connection Boost Protector

Description

IO-Power IOP-SCBP-D12O48-1
Outdoor12VDC Series Connection Boost Protector
Support Series In-line Boost Voltage and Separate Power Supply Protection
The IOP-SCBP-D12O48-1 is a special design for people who need more battery power and high voltage and large current capacity design of system requirements through electrical series booster design pattern, with a separate access to the isolated circuit design, meet the in-line booster function, while avoiding general series in-line boost voltage on the battery caused by injuries, resulting in damage batteries used in series.
The IOP-SCBP-D12O48-1 is outdoor 12VDC series connection boost protector, specially designed multi ports in-line automatic step-up design:
Insert 2 x 12VDC power supply voltage in series, the output voltage automatic step-up 24VDC power supply
Insert 3 x 12VDC power supply voltage in series, the output voltage automatic step-up 36VDC power supply
Insert 4 x 12VDC power supply voltage in series, the output voltage automatic step-up 48VDC power supply
Insert different voltage power supply voltage in series, will automatically output superposition of voltages on the power supply, but should not be more than the total voltage 56VDC.
For example: inserts 1 x 12VDC power supply and 1 x 24VDC power supply voltage in series, the output voltage of 36VDC power supply; and inserts 1 x 18VDC power supply and 1 x 24VDC power supply voltage in series, the output voltage of 42VDC power supply.
Series booster design patterns through electricity, IOP-SCBP-D12O48-1 each port to enter 12~28VDC 6A (8A Max), but can not exceed the maximum stack voltage 56VDC. Port input currents up to 6A (max 8A), the total output current of the same series up to 6A (max 8A), output 48VDC * 6A= 288W/H (up to 48VDC * 8A = 384W/H). Regarding the need to consume a larger outdoor trading system can be truly functioning electricity demand, for example use for indoor and outdoor telecommunications systems, outdoor communications systems, emergency broadcasting system, wireless network system, outdoor surveillance system, outdoor detection and management system ... , And so on.
Outdoor 12VDC series connection boost protector, in addition to general power series step-up operation applied to outside power supply, especially when the mix of outdoor power systems, separate charge mode with separate input reverse current protection, would not result in UPS power systems battery damage. Even has a size of battery capacity or battery low voltage differences, The IOP-SCBP-D12O48-1 Outdoor 12VDC series connection boost protector, will be able to offer mutual isolation and reverse protection and access protection features such as excessive discharge.
The IOP-SCBP-D12O48-1 Outdoor 12VDC series connection boost protector, Crashworthiness Design reinforced metal case with IP67 water and dust proof design and sustainable design of product temperature -40 ~ + 70
℃
, even if they are placed in the sunshine hot outdoor environment remains normal and stable work. Each output port rubber beam head for high temperature corrosion protection IP68, tying can be achieved without lines when connected to the fixed effects. For the installation, operation and safe use of outdoor environment, design separate short-circuit and reverse polarity protection and shock lightning surge protection (30V 1500W), meet a variety of safety requirements for power imports.
IOP-SCBP-D12O48-1 Specification
Model
IOP-SCBP-D12O48-1
Outdoor12VDC Series Connection Boost Protector
(SCBP)
Iron Airtight Housing
IP 67
Input DC Voltage
Each Port Input 11~14.5VDC
Input DC Current
Each Port Input 12VDC 6A (8A Max)
Output DC Voltage
12VDC + 12VDC = 24VDC
12VDC + 12VDC + 12VDC = 36VDC
12VDC + 12VDC + 12VDC + 12VDC = 48VDC
12VDC + 24VDC = 36VDC
12VDC + 12VDC + 24VDC = 48VDC
24VDC + 24VDC = 48VDC
(Series concatenation every port will reduce the voltage 0.1VDC~0.5VDC)
The product by serial isolation protect design, so you can take series concatenation upgrade voltage mode using the stack, serial output voltage required is lower than 56VDC. Series concatenation upgrade over 56VDC voltage output, will produce temperatures rising issues, long-term use may result in damage to the product.
Output DC Current
Series connection 6A output current (8A Max).
Concatenation of input power required special attention, each input port are subject to maximum current requirements relative to the output port.
Input current >= for each port output current.
Input DC Power Connector
DC Jack Connector * 4 (
Φ
5.1mm/2.1mm)
Output DC Power Connector
DC Jack Connector * 1 (
Φ
5.1mm/2.1mm)
Transform Efficiency
95%~
Power mode of operation
Stacked series by upgrade voltage-mode, elevated series voltage to maintain the same current modes of operation
The product by serial isolation protect design, it can protect all the output power supply side or charging UPS’s battery side and power operation protection
Protection
Input power overcurrent protection
Input power supply over high voltage protection
Short circuit protection
Imported power polarity protection for anti-welding
Surge protect for each port (30V/200A/6KV 1500W)
Input port reverse current block
Output port reverse current block
Industrial Housing & Connector
Iron Airtight Housing
IP 67 Gland Connector
Connector Type
Input DC Power Source: 11~14.5VDC 6A 8AMax, DC Jack
Output DC Power Port: 22~48VDC
56VDC Max, 6A 8AMax, DC Jack
(Series Connection will drop about 0.3VDC~0.5VDC by each port)
LED Display
Input DC Power Source: 4 Green Color LEDs
Output DC Power Port: 1 Red Color LED
Operating Temperature
-40
°
C ~ +70
°
C (Use or storage at -40
°
C environment, please be sure to inform in advance, related accessories and wires should be replaced; Recommends that the equipment will be installed in the power distribution box)
Storage Temperature
-40
°
C ~ +70
°
C (Use or storage at -40
°
C environment, please be sure to inform in advance, related accessories and wires should be replaced)
Rel. Humidity
10~95%RH
Dimension
195mm(L) x 185mm(W) x 45mm(H)
Weight
0.8Kg
Housing Waterproof
IP67
Approvals
CE FCC in progress
Installation
1.Street lamp pole mount or Upright pole mount
2.Wall mount installation
Warranty
12 months
Ps 1: Product specifications change, without notice, consultation with agent or dealer before buying the latest specifications