Exhaust Vent Diverters For DeWalt 20V Cordless Lithium-Ion Vacuum DCV517 DCV517B

Description

Hello Folks! Do you have a
DeWalt 20V DCV517 cordless wet/dry vacuum
? (
vacuum not included
) If you do then you know it's a great vacuum with the exception of one thing, the exhaust side vents. These side vents blow dirt everywhere before you can even vacuum anything up :oP This can be extremely frustrating especially when you are trying to clean up sawdust or light material (see pictures).
To solve this problem I developed the
RCDM
ORIGINAL
"Exhaust
Vent Diverter
"
that bolts right up to the sides of the vacuum (without modification). This diverter system directs the exhaust air from your vacuum upward which greatly reduces the disturbance of dirt and dust around the vacuum (see pictures).
Some sellers have copied my idea and that is because its's a good one!
Don't be fooled by cheap imitations that break off the first time they are used.
Get the
ORIGINAL
Exhaust Vent Diverter that is held on with STAINLESS STEEL hardware!
Note: Newer versions of the DC517 vacuum have been shipped with T10 Torx screws in lieu of the Phillips head screws shown in this listing. This kit now includes a
T10 Torx driver tip
but will need a 1/4" hex head nut driver or drill driver tip holder (not included) to use this Torx tip correctly.
Combined shipping available when you use the cart before checkout !!!
There is no appreciable reduction in suction with these vents installed just overall improved performance of an already awesome machine! Get your RCDM EVD's today and see just how more useful your DeWalt vacuum can be.
To install the vent diverters you must first remove the battery and hose from the base of the unit (refer to user's manual for removing hose from vacuum). Then you must remove eight Phillips head screws (or T10 Torx head screws) from the bottom of the vacuum as seen in the photos. The motor assembly will now drop out and you can install the vent diverters, one on each side with the included hardware. Reassemble the vacuum and you are ready to go! Be sure to install the diverters with the vent pointed upward as in the photos.
Note: You will need a Phillips screwdriver OR a 1/4" nut driver and a pair of of pliers (needle-nose OK) to install the vents (these tools not included).
This product does NOT work with the DeWalt 18V vacuum (DC515) and is only guaranteed to work with the 20V model.
This auction is for
one set (left and right) 3D printed black PETG plastic vents, stainless steel mounting hardware and Allen wrench for the provided screws
(
DeWalt vacuum not included in listing
).
Be sure to check out more
RCDM ORIGINALS
including the
RCDM Vacuum Nozzle Protector
,
RCDM Mini Crevice Nozzle
and the
RCDM Nozzle Attachment Clips!!!
for the DeWalt DCV517 vacuum!!!
RCDM 3D printed parts are made right here in the USA on American Made FDM type printer machines. Buy with confidence as I stand behind what I offer and will do my best to handle any issues my customers may have.
NOTE: We DO NOT ship outside of the 50 United States due to current international buyer scams so please do not ask for an international shipping quote. International buyers are welcome to use a freight forwarding service but do so at their own risk.
Click here to check out more quality RCDM products today!!!
Thank you for supporting American business and thanks for considering RCDM products!!!